How to Drain Car AC System | 7 Different Methods Shared

0

The car’s AC system is one of the essential parts of your vehicle. Ac system is used to cool down the air inside the car, but sometimes it can cause severe issues to your car’s engine. So you need to drain your car’s AC system at regular intervals so that you can monitor its performance and prevent the occurrence of any severe problems. 

How to Drain Car AC System

How to Drain Car AC System

The first step you want to take is to remove the radiator cap from the car and locate the drain cap under the vehicle. To remove it altogether, you’ll need a wrench. Next, place a bucket underneath the radiator drain cap to catch the antifreeze, which will drain when you remove it. Then, open the drain cap with a wrench. It will allow the antifreeze to drain until it is empty. 

Now, reinstall the drain cap tightly back into place with the wrench. Next, you will want to remove the fill cap from the radiator and refill the system with the new antifreeze. The final option is to fill the radiator to the right level with clean coolant.

7 Different Ways to Drain Car AC System

Way 1

The most common option for emptying the car A/C system is to connect the refrigerant condenser outside the vehicle A/C system. If this is not possible, an often-used method for emptying the system is to turn off the engine, remove all A/C hoses from where they are connected, open the radiator cap to release any pressure left inside and disconnect the high-pressure line from the compressor.

Way 2

Car air conditioning systems drain using the radiator; some use the overflow reservoir. Drain plugs are not used because they can usually be made of plastic. The radiator is the most common technique for draining a car’s air conditioning system because it is found on nearly all vehicles and has a large liquid capacity.

Way 3

Here’s a great way to clear out the air conditioning system. Just remove the air filter, put a funnel in the air filter box, pour all the air conditioning liquid into a container, and clean the air filter box. Then, start the car and turn on the air conditioning system to let all of the old liquid pass through the heater core, leaving the AC system clean and ready to be refilled. Make sure not to put the old juice back in, though.

Way 4

It can be quite a hassle to find a way to drain the air conditioning system of your car. That’s why we’ve written an article that’ll tell you how to get all of the air out as quickly as possible. You’ll also need some tubing and a safety canister. After that, you’ll need to find the low-pressure shutoff valve. 

It can be located in the engine compartment by looking under the hood. Then, you’ll need to double-check that everything is in the proper sequence. Lastly, you’ll need to open the canister and allow the refrigerant to flow through the system out of the exhaust pipe. Lastly, you’ll need to top up the system with the new refrigerant, and you’re good to go!

Way 5

Here’s a simple technique to drain the car’s air conditioning system. First, locate the AC drain valve. It is found on the bottom right-hand side under the hood. It’s usually a tiny faucet and is often left open because there isn’t much pressure in the system. 

Grab a socket wrench and loosen the valve. Once this is done, the AC should start to drain. Leave the faucet open for at least five minutes to drain thoroughly. After it’s finished, tighten the valve, close the hood, and you’re ready!

Way 6

It is time for you to drain the AC system and use a vacuum pump to remove the air from the system. If you can hear gurgling when you turn on the system, you will have to get inside your car and hopefully have a vacuum pump with you in the trunk.  

It might be a difficult task, so proceed with caution. Do not allow the vehicle to start and turn on the AC system. If it does not catch in time, this can cause water to gurgle in the system and onto the floor.

Way 7

The first way is to attach a hose between the low point of the system and an open container.  

The other method is to remove the soft point cap from the high side of the system, attach a hose, and open the other end to the outside air. The second method will be more effective at higher altitudes where the pressure may be more significant inside the container.

Frequently Asked Questions

How Can I Evacuate My Car AC Without A Pump? 

If you want to evacuate your AC without a pump, there are two ways. One way is by using vacuum gauges, and the other is by using a vacuum switch. A vacuum gauge is used when evacuating through a suction line, and a vacuum switch is used if the evacuation is not available through a suction line. 

How Do You Drain Freon From The Air Conditioner?

Freon is a gas commonly found in air conditioners. A quick way to drain Freon from an air conditioner is by inverting the device and removing the top installed with Freon. It will allow any remaining Freon to escape as a gas. It’s best to be safe and wear gloves, as some studies have shown that prolonged exposure to Freon can damage the respiratory system.

How Much Cost Does It Require To Evacuate The Car AC System? 

If you want the cost of evacuating your car AC system, you should know that removing all the old refrigerants from the manifold and receiver-drier is a process. This process typically costs around $50-$150 and will take two hours to complete.

Conclusion 

The basic idea of a car air conditioning system is to remove the heat from the car cabin by condensing the water vapor in the air. The hot air from the house is pulled into the car’s engine compartment and cooled by the radiator, or if the vehicle has a liquid-cooled engine, the radiator is replaced by a heat exchanger.

The cooled air is passed through the air conditioning condenser, condensing the water vapor inside. The water thus produced is collected by a water pump and passed to the expansion tank, where it is fed into the air conditioning system again.

How to Defog Car Windows in the Rain without Ac | Different Methods Explained

0

When it starts raining, the wipers in your car won’t be of much help. They design to remove the water from the glass and improve visibility. But they won’t be able to do that when it is raining hard. Water is likely to accumulate on the glass when the rain is awful and causes defogging. It is particularly factual when you are driving at great speeds. This blog will look at how you can defog the car windows in the rain without the AC.

How to Defog Car Windows in the Rain without Ac

How to Defog Car Windows in the Rain without Ac
  • It’s a long road – defogging your car windows during a rainstorm can be a daunting task.
  • You need to clean the inside of your car’s windows without running the air-conditioning and making the interior cold.
  • You need something you can use for a long time and won’t turn into a mess.
  • A wipe that doesn’t leave streaks.
  • A wipe that’s easy to use won’t spill everywhere and won’t leave a sticky film.
  • Wipe that’s not only effective but also safe to use.
  • If you’re driving in the rain, you can keep your windshield and windows clear and free of fog by turning on your defroster.
  • If your windshield or windows are fogging up, it may be because you’re using the wrong windshield washer fluid.
  • A surefire way to keep your windshield and windows clear is to ensure your defroster is working correctly.
  • If you’re driving in the rain, you can keep your windshield and windows clear and free of fog by turning on your defroster.

How to Defog Car Windows with a Hair Drier? 

How to Defog Car Windows with a Hair Drier

Many heat the car window defroster grids from inside the car, but you can use a hairdryer, too. If your vehicle does not have built-in grids, you can make your own by punching a few holes in the dryer’s nozzle. In case, you have a small hairdryer, you can use it to direct the heat at the window. If you have a hairdryer with a fixing agent nozzle, use it to focus the heat on a small part of the window. It should relieve the ice quickly.

How to Defog Car Windows with Window Wipers?

How to Defog Car Windows with Window Wipers

Window wipers mean to clear the windshield of water and ice. If your window wipers are only smearing the defogger across your windshield, you are only making things worse. Window wipers have a blade on one end that sits on the windshield. There is a rubber part that holds through the sword. And this is the part that comes in contact with the glass. 

The rubber part will sometimes become worn or dry and will not correctly remove the frost and snow on the glass. It will cause the window wipers to smear the ice and snow to create even more mess. If this happens, you need to replace the rubber part of the wiper blade. It would help if you took the edge off the window wiper arm to replace the rubber part.

How to Defog Car Windows with Everyday Household Items? 

How to Defog Car Windows with Everyday Household Items

To defog your car windows, you will need a rubber (or plastic) squeegee, water, and a towel. Wet the scraper and run it over the window straight (vertical or horizontal, depending on how the window washer fluid applies). Then, wipe the window in a straight line. The water and washer fluid will collect on the towel. If you have a towel with little nubs on it, you can use these to clean around the windows, like in the door handles, the visors, and the center console. 

How to Defog Car Windows with Defogging Spray?

The best thing to use to reduce fog on your windshield is the defogging product you can come by at any auto parts store for about $5. The best way to use defogging spray is to spray it on the windows as soon as you’re about to drive. It will prevent the water from freezing on the windshield. The uses of a defogging spray are almost the same as the defroster.  

You can use this spray to defog your windshield when you have to drive in the early morning or late at night. Your car window will get fogged up when you go in too cold weather. Some people, however, are afraid of using chemicals on their car windows. 

How An Anti-Reflective Coating Helps Your Car Window From Fogging Up? 

Use anti-reflective coating for car windows so that you can see without difficulty when it’s raining. Anti-reflective coating for car windows acts as an anti-fog. The coating is a specially designed layer that adheres to the glass that helps reduce glare and reflections. There are different anti-glare treatments for different kinds of drinks. 

Some are for the side windows, some for the windshields, and some for the headlights. You can get anti-reflective coating for car windows at local car shops. You can also depart online and search for a reliable website. There are a lot of websites that tender replacement window treatments online.

Frequently Asked Questions

What’s Your Favorite Hack for Defogging Car Windows in the Rain without Air Conditioning?

  • Take a bag of ice from the freezer and place it in front of the windshield. The cold from the ice will cause moisture on the windscreen to condense and get wiped off by the wipers.
  • Turn on your headlights and put the wipers on high. The intense beams of light will illuminate your windshield, resulting in better visibility and less streaking.

Which Is The Best Way To Defog Car Windows?

  • Use a defogger.
  • Bought one of that little spray can things you see in the mall, and it works pretty well.
  • Use a squeegee! Every time the windows fog up, I run the squeegee over them until they’re clear.

Which Is The Best Way To Defog Your Car Windshield In The Rain?

  • Roll down your windows turn on your windshield wipers. 
  • Spray window cleaner over the windows and then wipe off with a paper towel. 
  • Wipe off the window with a paper towel. 

What Causes Car Windows to Fog Up In the Morning?

  • Low humidity
  • Inadequate defroster
  • Something else 

Conclusion

In conclusion, the best way to defog your car windows during a rainstorm is to use a wet cloth. In general, it takes the same amount of time as using a hairdryer in a medium setting. Wetting a fabric can take as little as one minute, but it’s more commonly two minutes, which is still faster than using an AC on medium-high speed.

How to Convert a Car Engine to a Boat Engine | Step by Step Guide

0

It’s right that a car engine and an outboard differ. Certain features of a car engine are not compatible with that of a boat. A lubrication system, for instance, is one of the major differences between a car engine and a boat engine. So, one can’t use an automobile engine as a marine engine. However, this is possible after proper alterations. I will teach you how to convert a car engine to a boat engine.

Many technical persons are making their outboards for small recreational boats by making some alterations in a car engine. To do this, one should have a grip over ‘ how to convert a car engine into a boat engine? ‘. 

You may know that gasoline engines can be a strong way to power a boat. With a few modifications, it will run perfectly on an outboard too. The required parts are easily available in the market at an affordable price. However, purchasing these from a marine dealer as an automotive dealer will charge more than a mariner. This guide will discuss all facts about using a car engine in a boat. So, let’s go through this guide to explore something unique.

How to Convert a Car Engine to a Boat Engine?

How to Convert a Car Engine to a Boat Engine

An automobile engine fails to perform in the water as it is designed for roads, not marine uses. You’ll have to go for certain modifications to use it for a boat. After alterations, you can use it for your boat too. Here are some alterations that you’ll have to do in an automobile engine to make it perform in water too. 

Requirements for Alterations

To modify your car engine for your boat, you’ll need the following tools and components. 

  • A Water-Based Cooling Exhaust
  • A Water Pump Specialized for Marine Uses
  • Carburetor Tilter 
  • A Flame Catcher for Carburetor
  • Solid Brass Plugs
  • Special Engine Mounts
  • Oil Filter Modification Tools
  • Exhaust Elbows for Marine Use
  • Water Cooler Cover Plates 
  • Extensions for Starters

Depending on the engine model and manufacturing, you may need some additional components. However, these are the essential ones that will replace the genuine car engine’s parts. Now let’s check which alterations are necessary to convert a car engine into a boat engine. 

Broad Power Camshaft

The road engines feature a speed increasing, speed decreasing, and gear transmission system. This will need a different mechanism as compared to that of the boat.

In a car, a camshaft with a narrow power band is used. But marine engines have a fixed speed for forwarding as well as reverse. So, replace the narrow power band camshaft with a broad power camshaft that may range from 500 RPM to 5000 RPM. 

This alteration is necessary as there is no gear change system in a boat. When you replace the narrow power band with an extended power band, it will generate maximum torque. This torque, in turn, will provide much power to the boat. 

Flame Catcher 

The car engine features an air cleaner due to road pollution hazards operated on the water surface. The boat will feature relatively low air pollution. So, it doesn’t need an air cleaner. Replace this component of the engine with a flames catcher or arrester. This will catch fire coming out of the gasoline engine. A flame catcher prevents the possible risk of explosion that may result from backfire. Check out the flame catcher according to your engine’s type. 

Use Ignition Free Alternators

The alternators used in a car engine create a spark upon ignition or starting. This is a risky operation in the case of a boat. So, replace the sparking alternators with ignition-free alternators. These feature a mechanism that sucks up all the heat causing due to the ignition. So, the screens used in these switches prevent the temperature from reaching a risky level. So, replace all the ignition alternators with ignition-free alternators. 

Water Cooled Exhaust System

An automobile engine features an air cooling system for the exhaust. This is not an ideal one for marine use. Moreover, the engine heat may result in certain issues. So, it’s good to replace the air-cooled exhaust with that of water-cooled. 

Water Pump Specialized for Marine Uses

The automotive engine has a circulating water system that cools the engine. This system doesn’t pump the water into the engine. However, the outboard engine must pump the water inside the engine to keep it cool.

Also, the car engine has less resistance to marine water effects like corrosion. So, it would help if you went for an alteration that may help the cooling system withstand even in saltwater. 

You can replace the traditional pumping system with a rubber-type compeller that can withstand marine situations. Moreover, this type of pump will run slower than a car engine. 

Replace Steel Plugs with Brass Plugs

Your car engine will have a freeze or expansion plug made of steel. This kind of plug will not be ideal for marine uses. The corrosion and rustic effect of the marine water will lead to the inefficiency of the plug. So, it’s good to replace it with steel so that your outboard may work effectively. If you can’t find enough brass plugs to replace all, you can consider altering just those in contact with water. 

Other Essential Alterations

Besides the alterations mentioned above, the following alterations are also necessary. 

  • Adjustment of the oil filter.
  • Special mounting of the engine, as per need.
  • Insert plates covering pulleys.
  • Relocate the starter motor where it’s not in touch with marine water. 
  • Tilt carburetor as per need. 

Conclusion

Automotive engines fail to perform in marine as these are made for road uses. However, you can insert your car’s engine in the small boat by doing some essential alterations to it. Most of the parts designed for road uses can’t sustain marine water. So, replace all those engine parts vulnerable to danger when in contact with the water. We have illustrated some major alterations to be made in an automobile engine if you want to use it in a boat. 

How to Change Mileage on a Car | Follow These Simple 4 Steps

0

People may wonder why so many people would like to change their car mileage? To discover the solution, you must understand two distinct causes. They are a legal reason and an illegal reason. We will examine here to modify the car mileage for legal grounds.

Special Note: We do not provide any guidance, advice, or information on how to break the law. We are only discussing legal ways to change the car mileage.

How to Change Mileage on a Car

How to Change Mileage on a Car

Change Mileage on Car with Roll Back the Odometer it is too familiar for people to underestimate the mileage on their vehicle. We are constantly buying and selling cars.

How do you know the mileage accurately reported? There is a path to alter auto mileage in minutes. Using a Car odometer reflector kit, secure it over the odometer on your dashboard. The chip inside is tiny and weighs less than a gram.

It will not affect your ability to drive or light up at night. All of your driving habits will be unaffected because the device is not in your line of sight. After years, it is time to sell your car, unplug it, and your odometer will be down by however many miles you have driven.

Here Are Some Other Methods to Change Mileage on a Car

Step 1

First of all, you must know that changing the odometer readings on your car is illegal and can get you jailed, so think before you do it. If you still want to proceed, first try disconnecting your car’s battery for about 3-4 hours.

Cool down is very necessary for the computer chip that controls the reading on the odometer. Behind the battery detached, you must enter the software according to the make and sample of your auto.  

Determinate that this software may be prohibited, so you should be very attentive while purchasing it. Also, it would benefit if you were very cautious while joining the latest mileage. You don’t want to join the wrong mileage as it may cause you many problems in the future. After joining the latest mileage, create the confidence you detach the barrage furthermore and reconnect it. It will help the car to take the further information.

Step 2 

People usually change their car’s mileage to reduce their taxable income or claim a tax deduction. If you’re going to change the mileage of your vehicle without the risk of getting caught and without the cost of getting it towed to your mechanic and without spending too much money, then you should go online and find a handy tool. It’s called the electronic mileage adjustment tool. 

It’s an easy-to-use tool to help anyone change the mileage on their car. Your class is in the ancient and unique mileage, and the schedule makes all the appointments for you. Then you can print out the receipt and show it to the IRS, and no one will ever catch you!

Step 3 

GPS systems are beneficial in tracking distance, and they can also use to change the odometer reading. But it’s illegal. So you have to modify the odometer readings by yourself. You can’t directly connect a GPS to your car’s electronic system.

The GPS calculates your driving distance and records it in the memory in the unit, so it still looks like the odometer reading has not changed. There are only three ways to get around this: hack and modify the system; swap out the odometer, or overlay and swap out the unit. 

Step 4

The mileage adjustment card works only for diesel cars. For petrol cars, the card does not work. The card works only on vehicles that have an ODB-2 connector. You need to check the mileage of your vehicle before using the card. 

It makes your car’s mileage 10% more. If your car’s initial mileage is ten km/l, after using the card, you will get 11 km/l. Do not take the car for a long drive after using the card. Give time to the car for mileage to adjust itself.

Frequently Asked Questions 

How Do You Change The Mileage On A Car? 

The odometer on a car registers the numeral of miles the auto has moved. To change the mileage on a vehicle, you would need to remove the cover on the odometer and adjust the number to reflect the new mileage.

How Can I Reset My Odometer Legally?

There are a few methods to reset an odometer legally. One way is to get a new odometer with fewer miles. Another approach is to carry the car to a technician and have them “zero escape” the odometer. It means that they will physically turn the wheel until the number on the odometer reads 000.0. A third method is to supply a document from the Department of Motor Vehicles (DMV) named an Odometer Disclosure Statement. 

How Can It Command To Substitute The Odometer?

The expense of substituting an odometer can vary leaning on the make and sample of the auto. Generally, installing a new odometer costs around $100, but this price can go up or down depending on the specific situation. Some mechanics may charge more if the car’s dashboard needs to take apart to install the new odometer, for example.

What Can Happen When A Car Reaches Maximum Mileage?

When a car reaches maximum mileage, its computer system will either stop the car from starting or cut off power to the engine to prevent further damage.

Conclusion

If you are examining an effortless method to modify the mileage on your auto, then you are on a suitable site. The first step is to determine how much you need to change. If the car is in good shape and you want to change slightly, you can add mileage.

However, if you need to change a large amount of mileage, you need to find a way to do it that does not cost much and does not involve you doing much work. The primary method is to carry the car to a mart and hold them do it. 

How to Bypass TCC Solenoid | A Full Step by Step Guide

0

Transmission Torque Converter Clutch (TCC) solenoid plays a vital role in controlling the vehicle’s speed and preventing slippage. You can find this beneficial component in the middle engine’s rear and at the transmission’s front. This converter has a clutch that locks the output and input of the engine and transmission. We will learn how to bypass tcc solenoid.

Doing this gains the 1:1 ratio of the engine’s output and transmission’s input that prevents the slippage even at a higher speed. Sometimes, the TCC fails to maintain this ratio, resulting in any serious situation. To prevent any accidental situation, you should learn how to bypass the TCC solenoid. 

To handle the broken TCC solenoid, you should also learn how to diagnose and trace the fault in this system. In the later section of this precise guide, we’ll learn what symptoms of a broken TCC solenoid are and how to handle it. Though you can consider replacing it, bypassing it can help handle the emergency. Let’s move down to understand how to diagnose and bypass TCC solenoid. 

How to Bypass TCC Solenoid?

How to Bypass TCC Solenoid

Before moving on to learn how to bypass the TCC solenoid, you should learn all about the circuit that controls its functions. 

The torque converter clutch solenoid controls the fluid pressure that controls the function of the converter lockup clutch. It releases and applies to control the clutch. 

Like TCC solenoid controls the torque converter lockup clutch, the transmission control module (TCM) or Powertrain control module (PCM) controls the TCC solenoid valves. Different vehicles feature a different system where TCM or PCM control the TCC solenoid valves, respectively. Now, let’s read on to understand how to bypass the TCC solenoid. 

Connect the Standard Bulb to the PCM Circuit

You can simply bypass the TCC solenoids by using a standard 194 bulb. Take a bulb and connect one side to the circuit of PCM. Make sure that this bulb has a wire that’s long enough to reach the ignition. 

Connect the Bulb to Ignition

After successfully connecting one side of the standard 194 bulbs to the individual circuit coming from the PCM, the next step is to connect the other end of the bulb to ignition. Connect the B+ of the ignition to the other end of the standard bulb. 

You Have Done It

When you bypass the TCC solenoids to the ignition using a standard bulb, the bulb will load between the ignition and the TCC solenoids. So, it will help stimulate the TCC. After this, your vehicle’s lockup clutch system will work effectively. 

Note: Ensure that there is no low-temperature plastic near the inserted bulb. As the bulb repeatedly turns on and off, it may melt the plastic. So, try to insert the bulb away from the plastic items of your vehicle. 

How to Test TCC Solenoids? 

How to Bypass TCC Solenoid

When you suspect your car’s TCC solenoid is not working fine, you can check it out. Here is how to do this. 

Lift the Car

First of all, you’ll have to raise your car to test it. Use jacks to support the vehicle. Ensure that you have placed jacks at all four corners of the vehicle to support it well. 

Remove the Transmission Bolts 

When you’re sure about the jack support, proceed to unscrew the bolts that hold the transmission oil pan. Use a ratchet to remove these bolts. 

Remove the Pan

After removing the transmission oil pan’s bolts, you can remove them easily. So, slide the oil pan to take it out. 

Unplug the Solenoid

Soon after removing the transmission oil pan, the solenoid will be bare to you. You’ll see two plugs on the shift solenoid. Unplug one of these plugs to test where the problem is in the TCC solenoid. 

First, remove the transmission oil pan then you can unplug the plugs of the solenoid shift. You can diagnose the issue only when you know the characteristics of a bad solenoid. 

Symptoms of a Bad Solenoid

Symptoms of a Bad Solenoid

Here are some symptoms that show your solenoid is not in a good state. If you notice any of these, instantly see the mechanic or manage to bypass. 

Check Engine’s Light

TCM or PCM controls almost all the solenoid operations, so it keeps checking its operations. The check engine’s light will turn on and off regularly in normal situations. However, if you notice it is gone permanently, it means your TCC solenoid is not working appropriately. 

Problematic Shifting

If you notice any issue with the gear shift, it means the TCC solenoid is not working well. As TCC controls the shift, any wrong will also lead to a bad or erratic shifting. 

No Gear Shifting

Sometimes, the solenoid may suffer any severe damage. The solenoid will not let you change the gears properly in such a situation. A faulty TCC solenoid will prevent the proper fluid pressure necessary for gear shifting. When the TCC fails to create enough pressure, it will lead to permanent gear shifting issues. 

Driving With a Faulty TCC Solenoid

Most of the drivers get confused when it comes to the solenoid issue. They wonder whether they can drive with a faulty TCC solenoid or not. A simple answer to their query is ‘Yes’. When your vehicle faces the TCC solenoid breakdown suddenly, you can manage to drive it for some distance. However, in such a situation, gear shifting is a hard task. So, it’s good to avoid putting the car into a situation that will need repeated gear changes. If you stress the gear transmission, it may cause certain issues. 

Conclusion

TCC solenoid valves control the lockup clutch operations. When it works well, your vehicle’s transmission system will work effectively. Certain situations may lead to any breakdown in the TCC solenoid. It’s good to learn the symptoms of a bad solenoid. We have enlisted some signs of a bad TCC and traced the issue. However, you can drive it by bypassing the TCC solenoid by the above standard bulb method.