Like the Model 3, X, and S, the recommended tire pressure is 45 PSI in most Tesla cars. For Tesla Model 3 cars made between 2017 and 2021, the recommended tire pressure ranges from 42 pounds per square inch to 45 pounds per square inch. This is based on the model year, the trim level, and the original tire size.
The Tesla Model 3 is a car for people in five trim levels and tire size sets. Do not forget to look at the most frequently asked questions. Please select the year of the Tesla Model 3 to see its original tire sizes and tire inflation pressures.
Knowing the correct tire pressure for Tesla Model 3 tire replacements is essential.
Just swipe to the right; it’s very simple. You have to drive a little bit for the sensors to update. Usually, you must drive down the road and back to the right, and they will update. If you didn’t know, you could also swipe that way to get other information, but very simple, swipe to the right, and there’s your tire pressure.
Now, depending on the year of your Model 3, all models are the same as Tesla. However, depending on the year of your Model 3, some of the recommended tire pressures may be slightly higher. So if it’s 2018, the manufacturers recommend 45 psi. The pressure will be a little higher if you’re driving in a hot environment.
How to check your Tesla Model 3 tire pressure?
Checking the tires on your Tesla Model 3 every month or before going on a long trip is a good idea. This includes the spare tire. Tires lose up to 1psi (0.06 bar) a month, which is a lot. So, purchase a tire pressure gauge that is a good choice for you. This could be before you drive or at least three hours after you drive.
Tire pressure gauge: A “piss” sound is when air comes out of the tire. Because the air will go out, it shouldn’t significantly affect the pressure.
It’s important to compare your psi reading to the psi on your car. Do not compare your tire’s sidewall psi to your tire’s psi number.
Fixing over or under-inflated tires takes longer than with the correct pressure. You may need to change them more often. Under-inflated tires make it more difficult for cars to roll, so they use more fuel to stay at the same speed.
This light on the Tesla Model 3 tells you how much tire pressure your car needs.
So, it needs to be pumped up. Temperature changes may be why the TPMS warning light comes on and off. So, you should check out these measures.
We need to know where to find the recommended tire pressure for the Tesla Model 3.
If you want to know how much air to put in your Tesla Model 3 tires, you can find it on a tire placard next to the driver’s door, fuel door, or the owner’s manual.
Tire Care and Maintenance
It’s on this pillar, so it’s easy to see an icon that tells you something. If your Model 3 has wheels or tires from Tesla that aren’t on the car, some of the information may differ from what’s on the car labels. See Wheels and Tires for extra wheels and tires. Shining a light on the touchscreen tells you if one or more of your tires are under or over-inflated.
You don’t see the light go out immediately when you change the pressure in your tires.
As soon as you start your car with Model 3, you could find a problem with the TPMS. When you start the vehicle, the indicator light stays on for one minute—touch Controls Service on the touchscreen to show tire pressures.
Check your pressure as much as you can
An icon that tells you something, the pressure on your car’s tires will drop in cold weather. You can protect your tires from potholes with the proper tire pressure. This makes your car go farther when it’s entirely Ok with tire pressures.
It can cause a tire to overheat, which can cause a tire to crack, split, or blow out. This leads a vehicle to lose control and put people in danger. So, it’s great to know more about your Tesla Model 3 tire pressures.
If you want a smooth ride, keep the tire pressure between 42 and 45 psi for your Tesla Model 3; if you can’t find it on your door frame, you’ll find it in your owner’s manual. So if it’s missing, you can find it in your user manual.
We last checked it at 37 or 38 psi if you want to be sure. Model three is rated at 41 or 42 psi, but don’t quote me. As you can see, the tires are low on air and must be cleaned with AD. If you put nitrogen in these tires, they won’t fluctuate as much as regular air, so I think that’s the best option.
If you get one of these, as we said, a lot of air, but that’s the last tire; you should always pump and measure your psi when the tires are cold. As a result, the 42-41-degree range is a good place to set your tires.
My Opinion
Maintaining proper tire pressure is crucial for any vehicle’s performance, efficiency, and safety, including the Tesla Model 3. Regularly checking and maintaining the tire pressure according to the manufacturer’s recommendations ensures optimal driving experience, tire longevity, and improved fuel efficiency. Tesla provides specific guidelines for tire pressure in the Model 3 owner’s manual, and owners need to adhere to these recommendations.
I am an Automotive specialist. I graduated from Michigan with Bachelor in Automotive Engineering and Management. Also, I hold degrees in Electrical and Automation Engineering (BEng), Automatic and Industrial Electronic Engineering, and Automotive Technology. I have worked at General Motors Company for over five years as the Marketing Operations Production Coordinator. Now, I own my garage in Miami, Florida. I love cars and love to share everything about them with my readers. I am the founder of the Automotiveex blog, where I share everything about automotive, like car news, car mechanical issues, and anything else that comes up in my blog posts.
