How to Disable Driver Facing Camera | Step by Step Guide

Looking for a way to disable the driver’s camera? It’s quite frustrating when someone sees you driving. It’s not only annoying, but it’s also hazardous. This is why this article will assist you by providing information on how to disable driver facing camera.

How to Disable Driver Facing Camera

It is not that difficult to turn off the camera towards the driver. You can deactivate it by following a few steps.

Turn off the camera

This is the easiest method of all. To easily attain your objective, make sure you follow them correctly.

Step 1: Locate the camera’s power supply facing the driver. Locate any cables or wires connected and disable them by simply unplugging or unplugging them. This should turn off the driver-facing camera.

Step 2: Remove the camera facing the driver. If you don’t see that there are no cables attached, the camera may be firmly attached to your truck. In this instance, deactivating the cameras would be tough since they are often mounted to the metal surface using screws, which might be inconvenient.

Step 3: Cover the device’s lens with a thin piece of black tape. This assures that no images are taken when away from your car while having no impact on your normal driving experience!

Disconnect the DVR.

Turning off the DVR is another way to make it easy to deactivate the camera facing the driver. With this method, you can disable the camera’s recording function with the smart disk without any problems.

Step 1: Use a screwdriver to disassemble your car’s underboard panels. Be careful not to damage any parts.

Step 2: Find the DVR responsible for recording images on your monitor. It will most likely be plugged into a power source, so turn it off by simply unplugging or unplugging the cables and wires connected.

Step 3: Use another screwdriver to remove all the screws that secure your smart monitor to the vehicle. Then you may disconnect it and remove it from the automobile, ensuring that your actions stay private anywhere you go.

Use GPS Blocker

GPS blocking is another easy way to disable the driver-facing camera to hide from prying eyes. These gadgets are often pocket-sized and do not cost as much as an OBD or smart monitor.

Step 1: Locate the GPS transmitter connected to your car’s DVR. It will probably be next door, but if not, look for cables or wires connecting the DVR and the GPS device. Turn them off by unplugging them.

Step 2: Drive your car and enjoy. No one will know where you are to see you’ve turned off the GPS tracker. Thus there will be no smart camera to capture your activities.

Step 3: Move the GPS blocker to another vehicle when you are ready to go again and have fun.

Use a device cancellation.

Like many other security systems, smart drive cameras operate on the same radio frequencies as keyless entry and remote start.

Step 1: Find the frequency band of the DVR used to communicate with the camera. This will most likely be between 300MHz and 3GHz, but you may use an RF meter or scanner to look for it. Metal objects, like your roof, might interfere with signals, so having your interference device on hand is a smart idea.

Step 2: Turn on the interfering device and bring it closer to the DVR until your smartphone monitor shows no more activity. This should disable all recording options.

Use an RF Interference Device 

Jammers that block wireless transmissions are RF (radio frequency) jammers. As a result, employing it is one of the most convenient ways to disable these cameras. They are great for shutting off your display since they may interfere with mobile and GPS signals.

Step 1: Find the frequency band of the DVR used to communicate with the camera facing the driver. It will most likely be between 300MHz and 3GHz, but you may use an RF meter or scanner to look for it.

Step 2: Turn on the RF jammer and move it closer to the DVR until no activity is shown on the smart camera display. This should disable all recording options.

Step 3: When you’re ready to go for a ride, move the RF jammer to another car.

Frequently Asked Questions

Is Driver Cameras Legal in Ontario?

Is it permissible for the employer to insist on an in-cab camera system? This is applicable if you reside in the United States of America. Employers are not breaking any specific law by requiring cameras aimed at the driver.

Are driver cameras legal in Canada?

Forward-facing cameras onboard are legal in Canada, and if complete, video evidence is admissible in court. A video that has been edited or the length of which is insufficient to show the order of the evidence leading to the accident may have reduced or no evidential value.

How do driver-oriented cameras work?

Driver-focused cameras are usually part of a broader video telematics system, which comprises a network of cameras and sensors that track driver and vehicle activity and warn fleet management if particular criteria are exceeded or violated.

Does the camera invade privacy?

So far, the courts have ruled that onboard cameras are not an invasion of privacy. But many jurisdictions have laws that restrict a person’s voice or image without their consent. In other words, organizations should let their employees know if and how they use back deck cameras.

What does drive cam start with?

The drive cam mounts to the vehicle’s windshield and is set up to record the path in front of and inside the vehicle. Videos are created when the camera is turned on, either by a sudden change in motion (such as heavy braking, yaw, or collision) or by specific behaviour, such as using a cell phone.

Conclusion

If you disable the camera facing the driver, no one will be able to access or download the recording. That means you can do whatever you want, and no one will ever know. Moreover, deactivating any recording device only takes a few minutes and requires no special skills.