A broken car key ring can be a frustrating problem to deal with. It can make it difficult to keep track of your car key, and if the ring is completely broken, you may have to replace the entire key. In this article, we’ll take you through the steps you need to follow on how to fix a broken car key ring.
However, you can easily fix a broken car key ring with a few tools and some simple steps.
- Identify the type of key ring
- Gather the tools and materials needed to repair the key ring
- Carefully remove the key ring from the car key
- Prepare the broken area for repair
- Attach the portions of the keyring
- Secure the ring with glue or another adhesive
- Test the strength of the repaired key ring
- Attach the repaired car key ring to the car key
How to Fix a Broken Car Key Ring
Identify the Type of Key Ring
The first step in fixing a broken car key ring is to identify the type of keyring you have.
Several types of key rings exist, including split rings, wire rings, and carabiners.
Knowing the type of key ring, you have will help you choose the right tools and materials for the repair.
Gather the Tools and Materials Needed to Repair the Key Ring
Once you’ve identified the type of key ring you have, you’ll need to gather the tools and materials needed to repair the key ring.
The tools you’ll need will depend on the type of keyring you have, but some common tools include:
- Wire cutters.
- A small hammer.
You’ll need a replacement ring, a piece of wire, and some adhesive, such as super glue or epoxy.
Carefully Remove the Key Ring from the Car Key
Before you can repair the key ring, you’ll need to remove it from the car key before you can repair it.
This can be a delicate process, so take your time and be careful not to damage the key or the ring. Use your wire to gently twist and pry the ring open, and then slide it off the key.
Prepare the Broken Area for Repair
Once you’ve removed the key ring from the car key, you must prepare the broken area for repair. If the ring is broken in two pieces, use your wire to twist the broken ends back into place.
If the ring is bent or misshapen, use your pliers to bend it back into shape carefully.
Attach the Portions of the Key Ring
Once the broken area is prepared, you can attach the key ring portions.
If the ring is a split ring, slide the two ends back together and use your pliers to twist them closed.
If the ring is a wire ring, you may need to create a new loop by bending a piece of wire into a loop shape and attaching it to both ends of the broken ring.
Secure the Ring with Glue or Another material.
Once the portions of the keyring are attached, you’ll need to secure the ring with glue or another adhesive.
Apply a small amount of clay-type material to the area where the ring is joined, and then use your pliers to hold the ring in place until the adhesive dries.
Test the Strength of the Repaired Key Ring
Before you attach the repaired car key ring to the car key, it’s important to test the strength of the repair.
Gently tug on the ring to ensure it’s securely attached, and then apply a bit more pressure to see if it holds up.
Attach the Repaired Car Key Ring to the Car Key
Once you’re confident the repair is strong, you can attach the repaired car key ring to the car key.
Fixing a broken car key ring is a simple process that saves you time and money.
The first step is to identify the type of keyring you have, which will help you choose the right tools and materials for the repair. You’ll need to gather tools like pliers, wire cutters, and adhesives like super glue or epoxy.
Once you’ve removed the key ring from the car key, you’ll need to prepare the broken area for repair by twisting the broken ends back into place. You can then attach the portions of the key ring and secure the ring with glue or another adhesive.
It’s important to test the strength of the repair before attaching the repaired car key ring back onto the car key.
By following these simple steps, you can easily fix a broken car key ring and avoid the hassle of replacing the entire key.
I am an Automotive specialist. I graduated from Michigan with Bachelor in Automotive Engineering and Management. Also, I hold degrees in Electrical and Automation Engineering (BEng), Automatic and Industrial Electronic Engineering, and Automotive Technology. I have worked at General Motors Company for over five years as the Marketing Operations Production Coordinator. Now, I own my garage in Miami, Florida. I love cars and love to share everything about them with my readers. I am the founder of the Automotiveex blog, where I share everything about automotive, like car news, car mechanical issues, and anything else that comes up in my blog posts.