How to Straight Pipe a Car | A Full Step by Step Guide

wpx_bishal
-
0
How to Straight Pipe a Car | A Full Step by Step Guide

For those new to the automotive aftermarket, the idea of straight piping a car may sound like a daunting task. However, with some preparation and research, it’s easily achievable. 

Before beginning any work on your car, the first thing to pursue on what requires the type of exhaust system you are installing.

Because a straight pipe is a particular type of exhaust system that helps reduce backpressure and increase power output. The pipes style directs the flow of exhaust gases away from the rear wheels, allowing the engine to produce greater torque. 

How To Straight Pipe a Car

How to Straight Pipe a Car

Materials Required For Straight Pipe in the Car

A car can straight pipe by replacing the exhaust system with shorter and less restrictive ones. It will give the engine significantly higher power output and cause it to create more noise and release more pollution. However, you can use the following materials to straighten the pipe in the car.

  • Steel 
  • Aluminum
  • PVC
  • Wood
  • Metal
  • Plastic
  • Rubber

Necessary Tools for Straight Pipe in the Car

A straight pipe is a tube that has no bends or curves. To create one, you will need to cut and weld together two pieces of metal tubing. The most common types of tubing used for straight pipes are 

  • Screwdriver
  • Needle nose pliers
  • A grinder
  • Pipe cutter
  • Pipe wrenches 
  • A rubber mallet 
  • Cordless drill with a Phillips head attachment 
  • A bolt cutter or hacksaw

The Process to Straight Pipe a Car

The process to straight pipe a car is to remove the catalytic converter and replace it with a straight line. The catalytic promoter is an emissions control device that reduces pollution by burning some exhaust before leaving the engine. Removing it will increase the amount of pollution emitted from the tailpipe and improve performance. Here we explain the step-by-step process to straight pipe a car that defiantly will help you. 

Step 1:

Find out the ideal size required for your vehicle of brand and model. The diameter of the muffler will play a crucial part in avoiding backflow in your engine. The equipment should typically contain a pre-muffler if needed and a straight line.

Step 2:

Work with a vehicle lift in a garage. If you do not own a critical tool needed for the task, ask an individual who has a garage if you can borrow his time and space. Lift the vehicle using the hoist.

Check the present exhaust system closely and note the brackets and mountings. Illustrate your review on a sheet of document. Bear in mind that you will desire to account for the curves. You’ll have to skirt the electrical organs on the bottom part of the motor vehicle.

Step 3:

Dispose of your old exhaust system using a muffler hanger and pliers. Please do not remove the catalytic converter, but make sure to disengage it. This one component of the exhaust system helps your car run safely and is necessary for its function. Whenever you’re removing the previous exhaust system, remove any broken straps or clips, too.

Step 4:

Cut and prepare mandrel bends for fabricating the exhaust section. Go back and forward beneath the vehicle to check whether the area correctly fits when complete.

Then apply paint and corrosion protection to the mandrel after the pipe parts have been tack-welded. Paint your vehicle’s exhaust components according to their material.

Frequently Asked Questions

Why Is A Straight Pipe Necessary For A Car?

A straight pipe is needed for a car because it allows air to flow smoothly through the engine, preventing overheating. The straight-line also supports stopping oil from reaching into the explosion section. A straight pipe is a piece of the motor where air penetrates the cylinder.

The straight pipe allows the piston to move up and down smoothly, which increases power and efficiency. If the lines bent, they would be unable to move the air around correctly.

How Much Does It Cost Of Straight Pipe In The Car?

A straight pipe costs $1,000 – $2,500 depending on the model. The cost of a straight pipe depends on the size of the pipe. And how far away from the engine block it is located. If the pipe is close to the engine block, replacing the entire exhaust system may be cheaper.

However, if the pipe is farther away from the engine block, then the cost of straight pipe installation may be higher.

How Do I Install A Straight Pipe On My Car?

The first step is to remove the exhaust system from the car. Next, you cut the existing pipe and weld a new straight line. Finally, you reattach the exhaust system to the vehicle. We recommend using a welder for this project because it’s challenging to get an even seam when using a torch.

Which Is The Best Way To Straight Pipe A Car?

Straight piping a car is not an easy job. It requires the removal of the exhaust manifold and the catalytic converter, which can be time-consuming and labor-intensive. This can also be challenging to get everything back together again and will increase horsepower but also increase emissions.

What Is A Good Length For A Straight Pipe In The Car?

A pipe’s length depends on its system in the car. 

  • The length should be about 1/3rd of the distance between the driver’s seat and the backseat passenger.
  • For example, if you have a 3/8″ pipe, the ideal length would be 7/16″.
  • If you have an elbow that’s too long, it will be hard to get the air out of the pipe.
  • If you have a mini car, you may need to make sure there is room for the pipe.

Final Thought

In conclusion, straight piping a car can be a big decision. You have to know about the weighing pros and cons and decide what you want out of your vehicle. A straight piped engine will not be for you if you’re a collector. However, if you’re looking for pure power from your car, this may be just what you’re looking for. After reading this article, it is comprehensible that straight piped engines are perfect for some people but not others.

How to Repair a Car Cigarette Lighter Socket | Different Ways

wpx_bishal
-
0
How to Repair a Car Cigarette Lighter Socket | Different Ways

This blog will discuss the best ways to repair your car cigarette lighter socket. The problem of a “dead” lighter socket is a common one, especially if you drive around a lot. Although there is a lot of instruction floating around online, we hope to explain in the simplest terms how you can fix this problem on your own and get your lighter socket working again. Here is the guide on how to repair a car cigarette lighter socket.

We’ve all had the adventure of trying to smoke a cigarette in a car and the more delicate socket break. As a result, you leave with a lighter that won’t work even if there is power. In this explanation, I explain how to use a repair kit to fix the problem.

How to Repair a Car Cigarette Lighter Socket

How to Repair a Car Cigarette Lighter Socket
  • First, you’ll need to remove the faulty socket. Create confidence to wear gloves to bypass obtaining ignited by the increased voltages. Unscrew the metal lid to display the metal bar.
  • Then, using a wrench, take off the metal rod.
  • Here, the metal piece is causing the lighter to malfunction. This part has to replace.
  • A socket matches what’s left in your car in your new kit. Put this role in your car and the metal bar to maintain it.
  • Last, put the metal cap back on to protect the metal rod.

Distinct Forms to Restoration a Car Cigarette Lighter Socket

Distinct Forms to Restoration a Car Cigarette Lighter Socket

Way 1

If the auto cigarette’s lighter socket is not functioning, it may require repair. Foremost, confirm that the socket is not muddy and no residue stops it. If it is pure and transparent, the socket may need to substitute.

To replace the car cigarette lighter socket, remove the old one from the car and replace it with a new one. Ensure that the new socket installs correctly and correctly connects to the car’s electrical system.

Way 2

A car cigarette lighter socket fuse is typically a small, cylindrical piece of metal or plastic with a wire running through it. This fuse style melts and breaks the circuit if too much current passes through it, preventing the wiring in the cigarette lighter socket from overheating and potentially causing a fire.

If the fuse in your car’s cigarette lighter socket has blown, you can replace it by removing the cover of the socket and pulling out the old fuse.

Way 3

The foremost action is to evaluate the impairment. If the metal component of the socket bends, it can gently straighten with needle-nose pliers. If the plastic accommodation ruptures, it can glue jointly with a powerful bond. Suppose the contacts corrode during this process. They can clean with a wire brush. The final step is to reattach the socket to the car and test it by plugging in a lighter.

Way 4

The car cigarette lighter socket can repair by using a soldering iron. The solder will need to melt, and then the two ends of the wire will need to be attached to the car cigarette lighter socket. Once the solder has cooled, the car cigarette lighter socket should be working again.

Way 5

The first step in repairing a car cigarette lighter socket is identifying the problem. The most common issues with car cigarette lighter sockets are that they stop working or become loose. Once the problem identifies, the next step is to repair it.

It can do by using a screwdriver to tighten the screws that hold the socket in place or by using electrical tape to fix the wires that have come loose. Once the socket restores, it should work properly again.

Way 6

A car cigarette lighter socket can repair by using complex academic jargon to explain the necessary steps. First, the wires leading to the socket must locate and identify. Next, the cables must slit close to the socket. After that, a new wire must attach to each of the old wire stubs, and then those new wires must reattach to the socket. Finally, the entire area must test to ensure that it functions correctly.

Way 7

One approach to repairing a car cigarette lighter socket is to use a soldering iron to reattach the wires that have come loose. Foremost, create confidence that the energy to the cigarette lighter socket revolves off. Then, utilizing a couple of pliers, extract the metal surface from the facade of the socket. Once the body releases, use a soldering iron to reattach the wires that have come loose.

Frequently Asked Questions

Which Causes A Car Cigarette Lighter To Stop Working?

A car cigarette lighter may stop working due to several reasons. One opportunity is that the more delicate is not obtaining energy. It could be due to a malfunction in the auto’s electrical technique or an issue with the lighter itself. Another reason the lighter might not work is if it blocks by something, such as a piece of paper or a coin. If the flint is more delicate worn down, it might also stop working.

How Considerably Accomplishes Its Command To Set A Car Cigarette Lighter?

The cost to fix a car cigarette lighter will vary depending on the type of damage and the mechanic performing the repair. Generally, labor costs will range from $50 to $100 per hour, and parts may cost between $5 and $50. However, it is necessary to note that these estimates can vary greatly depending on the make and model of the vehicle. Some mechanics may also charge a diagnostic fee to assess the damage.

What Fuse Goes To The Cigarette Lighter?

The fuse that goes to the cigarette lighter is a 15 amp fuse. It is vital to utilize the proper fuse because it can blast.

Are All Cigarette Lighter Sockets The Same?

There is no one standard design for cigarette lighter sockets. Instead, they arrive in diverse figures and dimensions, relying on the make and representative of the auto. Some sockets are round, while others are square or rectangular. Some have multiple ports, while others have only a single port.

Conclusion

In conclusion, cigarette lighter sockets come in various shapes and sizes. At the same time, they all have the same function. Not all of them erect equally. When shopping for a cigarette lighter socket, be sure to compare the different options and prefer the one that is well suited for your needs.

How to Replace a 12v Car Socket | Steps with Different Methods

wpx_bishal
-
0
How to Replace a 12v Car Socket | Steps with Different Methods

We all are acquainted with a 12v car socket. Whenever we get a flat tire or need a charge for our phones, we head to our car for the 12v socket. Over the years, the car battery has remained the same. Unfortunately, so has the design of a 12v car socket.

That is not an issue when you obtain a balanced tire or require a fast charge. However, when you want to charge the batteries of your laptop or camera or when you have a secondary battery of your Tesla, you need to look for a replacement.

How to Replace a 12v Car Socket

How to Replace a 12v Car Socket

Stage By Stage Principle to Replacing A 12v Auto Socket

  • Carry out the pins on the base of the socket
  • Put the screwdriver in the socket and turn
  • Pull out the metal rod and the spark plug
  • Put the spark plug in the new socket
  • Put the metal rod through the new socket.
  • Close up the socket’s base.
  • Please put it in place.
  • Put the rubber molding over the hole
  • Put the screws in place and close the back of the socket like normal.
  • Test it by connecting a wire and touching the two ends to the two ends of the plug, and the spark will be there
  • Plug it into your car, and it should work like new

Five Different Ways to Replace a 12v Car Socket

Five Different Ways to Replace a 12v Car Socket

Way 1

First, you can find a vehicle repair shop that can fix a 12v car socket for you. Foremost, you keep taking separated the socket’s case. Then you can examine the wires and break them at the ends. Make sure it works and reassemble the new socket. Then you can put the socket back in your vehicle and get going again!

Way 2

Space Imprints appear from the plastic case with a razor edge and a small tolerance. Then using, a voltage meter checks to see if the wire is good before removing the plastic cover and disconnecting the connector from the old socket.

You’ll need about an inch of wire for each end of the wire soldered to the connector to connect to the 12v wire and measure out the length. Cut the wire and strip the insulation exposing the bare wire and solder the connector to the wire and attach the ground wire to the opposing point on the connector.

Way 3

If you are looking for an easy and cost-effective way to replace a 12V car socket but don’t want to replace the socket or charging points altogether, you can easily install a 12V socket with a socket wrench. Utilize an adjustable spanner or socket wrench to disconnect the 12V socket from the 12V charging point. Remove the 12V car socket. 

Mark the container lid with a marker pen that fits snugly inside the opening and drill a space in the top center. Fit the 12V car socket through the area, ensuring that the electrical wires connect to the 12V socket.

And that the 12V socket is aligned correctly with the hole in the lid. Mount the top onto the container and secure it with the screws provided with the 12V car socket.

Way 4

A 12v car socket can replace with a hacksaw. Once you cut the first line, move one inch up and cut again. Continue this process until you have successfully disconnected the socket from the car. You will have to cut through plastic, metal, and silicon. After disconnecting the two pieces, you can use a soldering iron to reconnect them by adding more silicon to the socket. 

Take your time when you’re soldering so you don’t make any mistakes. Once the silicon around the wires reconnected, tighten the screws, and you can do it!

Way 5

Foremost, bring a pin for the sort of socket you like to substitute. Test it works by plugging a phone charger or something similar into it. Terminate the front bumper from the auto. Detach the negative terminal from the barrage. If you don’t do this, you will cause damage to the car, and you may injure yourself. Once this does, remove the current socket from the car. 

Get a lighter and apply heat to the socket, be careful when doing this as you may catch fire! Once the hot, use a flat-head screwdriver to remove it. Put the new socket in its place and connect the wires like they were connected before. Re-attach the bumper and turn on the ignition and test it out!

Frequently Asked Questions

How Much Does It Cost To Fix A 12v Socket In A Car?

The cost to fix a 12v socket in a car can vary, but typically it costs around $10-15. The price can vary because sometimes the entire socket needs to be replaced, and sometimes it’s just a matter of replacing the fuse. A few other factors can affect the cost, such as whether or not the mechanic has to remove the dashboard to fix the socket.

Why Does My 12v Socket Not Work?

There could be a few reasons why your 12V socket does not work. One possibility is that the socket is burned out and needs to replace. Another reason may be that the socket is not correctly grounded, which could cause an electrical shock.

Do All Cars Have A 12V Socket?

While most modern cars come equipped with a 12V socket, several older models do not. Additionally, some aftermarket accessories, such as power inverters or jump starters, may require a 12V socket.

Are All 12V Plugs The Same?

The 12V plugs are not all the same, as they come in different shapes and sizes. It can create it challenging to discover the correct plug for the instrument you are attempting to power. It is vital to review your instrument’s specifications to ensure you are operating the proper hook.

Conclusion

In conclusion, if you need a new 12v car socket, you can use a few methods to replace it. You can carry your auto to a mechanic, order the part online and replace it yourself, or go to a local auto parts store. No matter which option you choose, read the instructions carefully and use caution while working on your car.

How to Reset Mass Airflow Sensor | 7 Methods Explained

wpx_bishal
-
0
How to Reset Mass Airflow Sensor | 7 Methods Explained

The Mass Air Flow Sensor is a fundamental part of the engine management system. If your Mass Air Flow Sensor is faulty, the engine management system will run in an open loop. The sensors starve information, and the engine will run without optimizing its performance. It can fail, so you need to reset it when that happens. Here is how to reset it and make it operational once again. We will teach you how to reset mass airflow sensor.

What Is The Mass Air Flow Sensor Reset Procedure?

How to Reset Mass Airflow Sensor

Resetting the Mass Air Flow Sensor is a pretty simple procedure; however, you need information on your car. Because it is best to have a mechanic do it for you; however, if it’s something you would like to do yourself, here’s what you’ll need to do: 

  • Open your engine compartment 
  • Locate your Mass Air Flow Sensor 
  • Check all the wires connected to the Mass Airflow sensor. You will see an air intake attached to the small black box.
  • Disconnect the small black box from the air intake. Now, the Mass Air Flow Sensor should reset.

Different Methods to Reset MAF Sensor

Method 1: Paperclip

If you want to reset the Mass Air Flow Sensor yourself, you’ll need to insert a paperclip into the reset port. You’ll need to find the port. It would help if you looked inside the engine first and then under the hood. Next, insert the paperclip and turn it to the right to reset the Mass Air Flow Sensor.

Then, start the car and observe which way it’s moving. If it doesn’t, you may have to take it to a mechanic, but if it does, it means you successfully reset the Mass Air Flow Sensor. You should always reset the Mass Air Flow Sensor if it’s acting up.

Method 2: Disconnect the Battery 

Disconnecting the battery and reconnecting it can reset the Mass Air Flow Sensor. I would highly recommend having a certified technician come to your location to check this out, and I would also recommend that you get a second to third opinion. I hope this helps!

Method 3: Compressed Air

First, use the compressed air to clean off the sensor to ensure any dirt or contaminants. After that, turn the ignition key. Next, connect the compressed air can to a clean air hose, then press and hold the can nozzle to the air intake duct straight below the sensor until the engine cranks. After this:

  • Turn the ignition key to LOCK.
  • Turn the key back to ON.
  • While the engine is still running, release the compressed air button.

After doing this, the engine must be allowed to run for at least ten minutes to complete the reset procedure.

Method 4: Use A Long Screwdriver:

MAF sensors locate in an easily accessible place, but some sensors are more challenging to reach than others. If you’re having trouble getting the MAF sensor with your hand, use a long screwdriver to push the reset button.

Once the button does go, you should remove the screwdriver and reset the sensor. If your detector is not functioning perfectly, you should believe in having a professional look at it.

Method 5: Using a Shop Vacuum

You need to use a shop vacuum with no bristle type of brush. The reason you need the vacuum is that it has a pressure regulator. You cannot use a standard vacuum cleaner or risk damaging your engine. Once you have the vacuum hooked up, turn on your car and start the vacuum.

Make sure the vacuum regulator is on full pressure. While the motor is operating, your MAF detector should reset. If it does not, you may require resetting it for several periods.

Method 6: Disconnect Fuel Injectors:

The MAF is an essential element in the vehicle’s ECM. If you disconnect fuel injectors to reset the MAF sensor, it will clear any debris that may have collected around the sensor, which can otherwise present problems for your car.

To do this, locate the gas tank on your vehicle and look for the fuel injectors. Disconnect them one at a time by turning them off and then again. This process will take about 10 minutes.

Method 7: By Idling the Engine

When the engine light is on, you will check your MAF sensor. If it requires resetting, you can observe these actions. First, start your car, turn the A/C on, and wait for the vehicle to idle at around 1200 RPMs.

Then, shift the car to drive. After doing that, turn the car off, wait five minutes and drive off! It’s best to do this on a flat surface, but it should work on a hill if you make sure your RPMs stay relatively flat.

Frequently Asked Questions

How Long Does It Take For The Mass Airflow Sensor To Reset?

It is the device that monitors the amount of air coming into your engine to provide an accurate reading on how much fuel is needed. The MAF sensor is only reset after 10 seconds have passed, so there isn’t any more interference from the coolant.

How Can I Know If My Mass Airflow Sensor Works?

Since the mass airflow sensor measures the volume of air flowing into the engine, if it is not working correctly, one could assume that there is a misread on how much air is entering. If this problem persists, the engine will run inefficiently and overheat.

What Codes Can A Bad MAF Sensor Cause?

A bad MAF sensor can cause a P0230 code, a Mass Air Flow Sensor Signal Malfunction. It can also cause a P0235 code, a Mass Air Press. Sensor Circuit Open or Short. There are other codes that this could cause, but these are the most common ones.

Why Do MAF Sensors Fail?

Many MAF sensors fail because of dirt and dust buildup. It means that air cannot pass through the sensor, making it less efficient. The heat from the engine is also a factor, and if it is too hot, the sensor can stop working.

Conclusion

Our article about resetting the mass airflow sensor can provide important information. This sensor is the primary sensor in your car. If it fails, you can expect to see the Check Engine Light, reduced fuel efficiency, poor driving experience, and other problems. This post has helped you learn everything you need to know about your mass airflow sensor and how to reset it. 

How to Remove Moisture from Car Headlight without Opening

wpx_bishal
-
0
How to Remove Moisture from Car Headlight without Opening

As we all know, headlights are essential for the car. They help the driver to see things. However, all car lights (including headlights), fog lights, and headlights can be affected by moisture. If you have water in the mornings, the lights may be dim and hazy. If the humidity does not remove, it will grow and affect the other parts of the car. Let’s dig deeper into how to remove moisture from car headlight without opening.

How to Remove Moisture from Car Headlight without Opening

How to Remove Moisture from Car Headlight without Opening

Headlights will get foggy when exposed to moisture, no matter how well maintained. It happens because the inside and outside of the lenses are different temperatures, causing condensation to build up. We have a simple solution for you to remove moisture from the car headlight without opening! 

First, you need to apply rubbing alcohol to a lint-free cloth and rub it on the headlight. Wipe the headlight in a circular motion, and the condensation should begin to disappear. If the headlight is still foggy, repeat the steps. Look after not to touch the lens, as it may harm the coating on the lens!

Different Ways to Remove Moisture from Car Headlight without Opening:

Way 1 

Moisture can cause a lot of problems in your car. It’s not good to leave moisture in your car. It’s better to remove moisture from a car headlight than life inside it. If your car’s headlight has moisture, you can remove it yourself. Here’s how to do it. Foremost, you ought to design a mug of cornstarch and a piece of towel. The cornstarch is good to absorb moisture. Then, wipe the moisture with the paper towel and dry the headlight.

Way 2 

A hairdryer will be effective if the moisture build-up is inside the headlight unit. It works by applying the hair dryer’s heat to the team to evaporate the condensation. First, use a flashlight to inspect the inside of the lens. If the wetness is on the lens’s exterior, this form will not function. If you’re lucky to have water on the inside of the headlight lens, then you can begin by turning the headlight on and off a few times to clear any remaining moisture. 

Then, use a hairdryer to heat the headlight. Move the unit around to ensure the heat distributes to all the water. Continue heating the headlight until the condensation is gone. If the moisture does not evaporate, the headlight lens may replace.

Way 3 

I use a simple trick to remove moisture from my headlight—3/4 cup of silica gel and about 2 cups of white vinegar. Add the silica gel to the white vinegar and heat it to about 120 degrees Fahrenheit. Place the headlight in a Ziploc bag.  

Let the headlights soak in the bag for about 12 hours. Silica gel is a porous substance that absorbs moisture. The headlight should be dry when you remove it from the pack and rub the lights with a soft cloth to polish it. 

Way 4 

Do you have foggy headlights in the morning? Considerable individuals accomplish, and it can be a bother to release. There are several ways to get rid of cloudy headlights, but perhaps the easiest is to use pressurized air. First, clean the headlights well with glass cleaner. 

You will want to make sure that the glass is free of all dirt and oils, as this will prevent the steam from re-depositing onto the glass. Next, find a can of compressed air. You can obtain these at your local grocery, drug store, and even office supply store. Spray the air in short bursts onto the headlights.

Way 5 

Remove moisture from car headlight with vinegar. Suppose you’re taking a road trip and notice water in your car’s headlight. It might be condensation. The vinegar will absorb the moisture. First, wrap the light in a towel. And operate the defroster for a rare minute to get the moisture out of the reflector. Then, pull the towel away and spray the vinegar on the towel. Check it in a few minutes, and the moisture should be gone!

Way 6 

It is essential to remove moisture from your car headlights to operate correctly. Water can build up on your headlights, which can be removed by simply placing the front of the car near a dehumidifier for about a day. It will ensure that your headlights work properly and that moisture does not continue to build up. If water continues to build upon your headlights, then you are risking the possibility of something else being wrong with your car.

Frequently Asked Questions

Is Condensation In Headlights Harmful? 

Condensation in headlights is not always harmful but can cause your lights to be dimmer, creating a more hazardous driving experience. Condensation causes when the ambient temperature of the air around the inside of your headlight reaches a point.

Then it moves from where the air’s water vapor starts to condense. And it forms droplets on the interior of your headlight’s glass. This process will continue until it either evaporates or freezes on the glass.

How Can You Clean The Inside Of Your Sealed Headlights? 

Utilize a toothbrush to wash the interior of your headlights. You can also use a vacuum or light air to dry it out before wiping it off with a rag.

How Do You Permanently Clean Foggy Headlights? 

Foggy headlights cause by moisture in the air. The water can remove from the headlight by using a specialized solution to clean them, corroding the metal on the headlamp with a chemical cleaner, or allowing it to dry out over time.

Does Rubbing Alcohol Clean Headlights? 

Rubbing alcohol for cleaning headlights is a practical and cost-effective approach to removing dirt and grime from a vehicle’s headlights. The chemicals in rubbing alcohol break down and dissolve contaminants, including residue from wax polish and oxidation, without damaging the paint on the car or severely altering the clarity of the lens.

Conclusion

We hope you appreciate reading about how to remove moisture from a car headlight without opening. Any water in the car can lead to corrosion on the car’s electrical parts. It can cause a lot of trouble for you down the road. Fortunately, there are some easy methods for removing moisture from your car headlight. We propose you try out one of these methods as soon as possible.

1...525354...76Page 53 of 76